NO. |
Name |
Quantity |
Usage |
| 1 |
2-D Measurement |
2 |
To test artwork expansion&shrinkage, target hole distance |
| 2 |
Line/space Measurement |
1 |
To test Line/Space |
| 3 |
Thickness Gauge |
1 |
To test board thickness |
| 4 |
Microscope |
1 |
To test dielectric thickness and structure |
| 5 |
Polisher grinder（bi-axle） |
1 |
To grind and polish section |
| 6 |
Laser Particle Counter |
1 |
To test particle in clean room |
| 7 |
Thermo-Hygrograph |
6 |
To test and control temperature and moisture |
| 8 |
Electric Balance，310g,1mg |
1 |
To weigh |
| 9 |
Electric Balance，210g,0.1mg |
1 |
To weigh precisely |
| 10 |
Surface Roughness Tester |
1 |
To test surface roughness |
| 11 |
Punch |
1 |
To punch section |
| 12 |
pH Meter |
1 |
To test PH |
| 13 |
Surface Copper Thickness Guage (mil) |
1 |
To test copper thickness precisely |
| 14 |
Mortable Surface Copper hickness Guage (OZ) |
2 |
To test copper thickness |
| 15 |
Peel strength Measurement |
1 |
To test peel strengh |
| 16 |
Oven，300℃ |
1 |
To bake |
| 17 |
Incinerator |
1 |
To burn |
| 18 |
Tin furnace |
1 |
To test thermal stress |
| 19 |
Autoclave |
1 |
To test absorption performance |
| 20 |
Precision Thermo-Hygrograph |
1 |
To test temperature and moisture |
| 22 |
Micrometer |
10 |
To test thickness |
| 23 |
Altometer |
1 |
To test bow&twist |
| 24 |
Vernier Caliper |
1 |
To test final product size |
| 25 |
Pin Guage |
1 set |
To test target hole diameter |
| 26 |
Hundredfold Microscope |
2 |
To test Line/Space |
| 27 |
Two-hundredfold Microscope |
2 |
To test Line/Space |
| 28 |
DC LOW OHM METER |
1 |
To test impedance |
| 29 |
PCB Sample Slice Machine |
1 |
To slice sample |
